← Docs

The music video workflow

  1. New project — pick a format and a frame rate ("Same as the first take" takes the rate of the first video you add).
  2. The song — upload the master audio (Media → Upload → Song or audio), then choose Use as the song at the top of the Media tab (or Set as the song in the Song panel, shown when no clip is selected). Creator finds the tempo, the beats, the bars and the song's parts; the grid appears on the timeline and the BPM in the panel.
  3. The takes — add many videos from Crate at once, then add them to the project from Your library in the Media tab (the folder button) or straight onto the timeline (+). As each one is ready, Creator syncs it to the song by its sound and puts it on its own lane, numbered 1–9.
  4. Review and mark — play, watch the takes in sync, mark ranges Good (G), Best (B) or Reject (X), and add notes (N).
  5. Cut — play the song and press 1–9 to switch angles live, or open the grid (⌘G) and click a take; or let Auto-cut propose a first edit.
  6. Polish — add transitions, effects, text and captions.
  7. Export — pick a preset; Creator renders from your originals in the background.

The Media tab

The Media tab is laid out around the song:

  • Song — the project's song and its parts (intro, verses, choruses…) as a strip.
  • Main footage — the takes with the song in them, in the order they happen in the song. Each row says which parts of the song it covers, and its bar shows where it sits in the song (light) and where the edit uses it (solid).
  • B-roll — shots without the song: where the edit uses them, or "Not used yet".
  • Your library — everything else, to add to this project. Media is never copied: every project and version uses the same files.

Choose a part of the song in the menu under the song to see only the footage for it; the playhead goes to that part, so + adds a take there. The footage the edit already uses in that part comes first.

A take synced to the song counts as main footage, and anything else as B-roll. To change it, choose Mark as B-roll or Mark as main footage in a take's menu (…). That's saved in the take's shot log, so it holds in every project. B-roll isn't synced to the song.

Fixing the beat grid

The Song panel has what you need when the detected grid is off:

  • Tap tempo — tap along four times or more while the song plays.
  • ÷2 / ×2 — when the grid counts half or double the tempo you feel.
  • Set downbeat here — put the playhead on the first beat of a bar.
  • Earlier / Later — move the whole grid by 10 ms.
  • Detect again — start over.

When only some beats are off (a pause, a tempo change), fix them one by one at the playhead: Move the nearest beat here, Add a beat here or Remove the nearest beat. The grid then follows your beats; Make regular goes back to an even grid (so do the tempo buttons).

Sections (verse, chorus, …) are suggested with the first beat grid, from where the song's sound changes: the louder part that comes back is the chorus, quiet edges are the intro and outro. Fix them by hand — a section starts at the playhead and lasts until the next one — or choose Suggest from the song to start over. Auto-cut can cut denser in choruses.

Shot logs and the song map

Every take can have a shot log — what it shows (place, time of day, light, colours, shot size, whether the artist sings along), how it moves moment by moment, and its highlights: the best moments, rated Good, Great or Hero. The song has a song map: its parts (intro, verse, pre-chorus, chorus, build-up, tag, …), the lyrics line by line, where it's quiet and where it peaks.

They belong to the take and the song, not the project: every project that uses them sees the same, so nothing has to be looked at twice.

  • Highlights are the orange strips along the top of a take's lane. Drag one to move it, drag its edge to change its length; select it and use the arrow keys (⇧ for a second) or Delete.
  • Select a clip of a take: the Inspector's Shot log section has every field, the highlights (with Add a highlight at the playhead), and what happens at the playhead.
  • On the Media page, click a video's picture (or Mark moments… in its menu) to watch the take and mark its best moments without opening a project. The strip under the video shows the take's frames: drag along it to find a moment, press Add a highlight (or M), name and rate it. Select a highlight and press I or O to start or end it at the playhead, or drag it on the strip by its tab (its ends change its length) (dragging anywhere else on the strip, inside a highlight too, moves the playhead); Loop replays a highlight while you judge it, and a removed highlight comes back with Undo. Each card shows how many highlights the take has.
  • Bad moments are the opposite: stretches that must never reach a video, in any project. Press B in the same window, or use Mark a bad moment at the playhead in the Shot log. The Builder and Auto-cut won't suggest them, and the editor refuses a change that would show more of one. A shot that already shows one turns red and stays as it is until you change it, and the video can't be exported until then. Unmark the moment if it turns out to be fine.
  • With nothing selected, Song map lists the parts and the lyrics — click one to go there — and Use these parts as the project's sections gives the project the same sections.
  • The song's lane shows how loud each bar is, its peaks and hits, and the lyric lines.

For several cuts of one song, duplicate the project (Projects → Duplicate) and cut each copy its own way: they share the media, the proxies and the logs.

Align the takes

Align at the top of the setup, or Align takes under the song in the Media tab, shows every take on one screen, lined up against the song's waveform and parts. It's the only place alignment changes, for the whole project: templates and variations inherit it.

  • Move a take: drag its bar, or use −10, −1, +1, +10 frames. On the keyboard, the arrow keys move the focused bar a frame, with Shift ten.
  • Check it: click its bar to play it with the song from that moment, and turn on Take's own sound. A take out of sync sounds like an echo.
  • Settle it: the tick says it looks right; B-roll takes it out of the lineup, in every project. B-roll stays listed below the takes, one click from coming back.

Creator compares each take's sound with the song. When it isn't sure (a take with other music, wind, or very little of the song), the take comes first, marked to check, until you say it looks right.

Show takes above the timeline adds the takes' lanes, for rating them and seeing which ones cover a moment. It's off until you turn it on, and your browser remembers the choice. The lanes only show where a take sits: it moves on the Align page.

Keep the person in a vertical crop

A wide take in a vertical video only shows a slice of itself. Creator knows where the person is in a take once its shot log says so, and picks that slice for you:

  • A shot you put in a block in the Builder starts framed on the person, and stays framed when you move it in its take or change the take.
  • Frame on the subject in the Inspector does it for one shot, and Frame every shot on the subject in the project's menu for the whole video. Both can be undone, and they replace a position you set by hand.
  • The picture takes 85% of the frame's height, so you see more of the shot with little border. A person who moves further than the crop can absorb gets it following them.

If it's wrong for a take, fix it once: on the Media page open the take, turn on Show the subject, and click the person at that moment. Every project using the take reads the correction the next time a shot is framed.

Review a batch of variations

Review the variations, on the variations page or in the editor's menu of variations, puts them all on one screen.

  • The chosen tile plays with the song, right in the grid. Space plays and pauses, and the arrow keys move.
  • A approves and X rejects, then the next one left comes up, still playing. U takes a decision back. On a phone, use the buttons.
  • Editing a variation sends it back to review, and its tile says so.
  • Export N approved makes one file per approved variation, with no need to wait between them. What's rejected or undecided isn't exported, and asking twice doesn't export anything twice.

A fix in the setup doesn't undo an approval, so look again at what you approved if you change the setup afterwards.

Live switching

  • 1–9 cut the edit to that take at the playhead. With snapping on (the magnet), the cut lands on the nearest beat.
  • ⌥1–⌥9 switch the selected segment to another take, at the same moment of the song.
  • Dragging the line between two segments moves the cut and keeps both in sync with the song.

Ratings

G, B and X mark the take that is playing in the edit: the range between I and O if you set one, the bar that is playing while you play, or from your previous mark to the playhead. Ratings show as a strip on the take's lane: drag its ends to change the range, the middle to move it; select it and press Delete to remove it. The grid shows each take's rating at the playhead on its tile, and the star button dims everything that isn't Good or Best.

Angles side by side

Select a cut of a take in the edit: Angles side by side in the Inspector shows the same moment from other synced takes next to it — 2 panels, 3 panels or a 2 × 2 grid, stacked in vertical formats. Each other take goes on its own track above the edit, in sync with the song, so you can trim or move it like any clip.

Auto-cut

Auto-cut… above the timeline proposes a whole edit: a cut every beat, 2 beats, bar or 2 bars, using Best before Good (or any take you didn't reject), never the same take twice in a row. The preview shows which take plays where; Replace edit applies it as one step you can undo.

The Builder

Builder in the top bar (a tab on tablets) shows the same edit as the timeline, as small blocks along the song, grouped by its parts: each cut of the edit is a block, and the parts the edit leaves empty are cut into blocks on the song's rhythm: a bar each, half a bar where the song is loud. A block is filled, empty, or has nothing to fill it.

Choose a block to see what could go there: In sync here — takes that cover that moment of the song, at that moment — B-roll, the best moments of your B-roll, for any part, and Other moments, the highlights of your main footage out of sync (one already in the edit is hidden unless you show it). The best rated come first, and those that look like the part's other shots: its light, colours, place and time of day, from the shot logs. Point at one to play it; click it to put it in the block. It keeps the block's effects and transition, and the timeline shows it at once; undo works in both. ← → move along the blocks, Play plays the block with the song, and Empty it clears it. Splitting, trimming and moving blocks stay on the timeline.

In its take shows where the block's shot comes from: drag its window along the take (or press ← →, with ⇧ for a second) to use any other moment; Back in sync with the song puts it back. A part's menu (…) splits it at the playhead into subsections — Verse 1A and Verse 1B, where the arrangement changes — joins it back, or empties it into blocks on the beat, ready to fill.